Home    Forum    Search    FAQ    Register    Log in
Search found 166 matches
Author Message
Post Forum:  35HD-DUAL-NAS (IDE&SATA)   Posted: Sunday, 25 March 2012, 11:13   Subject: Re: Dead NAS?

Hi,
the bootloader of the 100Mbit devices should be accessible through telnet as well.

The gigabit devices always need a serial cable.

If the bootloader is overwri ...
Post Forum:  35HD-DUAL-NAS (IDE&SATA)   Posted: Thursday, 22 March 2012, 10:29   Subject: Dead NAS?

Hello! after a bad upgrade, my NAS is .... dead?

I've tried the Serial interface, but it only outputs weird characters (I've tried to post them, but the forum don't allow me)
Post Forum: OpenWRT porting   Posted: Tuesday, 03 January 2012, 17:14   Subject: Re: Where Can I Find The Openwrt Port?

Hi, and have a happy new year!

I've been looking for some time for a port of openwrt for Raidsonic IcyBox 4210. I only found something for 4220. I hope they are quite similar, differing ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Friday, 16 September 2011, 18:31   Subject: Re: HELP: Nas Not Booting

So I booted on linux and ran the tests on the system partition of both disks separately as i have only one sata available.
Some errors were found and repaired on the second disk.

...
Post Forum: 35HD-DUAL-NAS-E   Posted: Saturday, 10 September 2011, 20:38   Subject: Re: HELP: Nas Not Booting

in the meantime I connected a serial adapter and could successfully communicate with the device.

I'll attach two log files:
-one where no hdd was connected
-one where both ...
Post Forum: Hardware Modifications   Posted: Tuesday, 02 August 2011, 09:51   Subject: Re: 35HD-NAS-E COM-port

Hi,
I use this cable for se ...
Post Forum: Hardware Modifications   Posted: Tuesday, 02 August 2011, 00:45   Subject: Re: 35HD-NAS-E COM-port

felix_max wrote: [
Post Forum: Hardware Modifications   Posted: Sunday, 31 July 2011, 21:30   Subject: Re: 35HD-NAS-E COM-port

I show you that link because you will find cables to make a working serial port.
I know that that way usually is used to unbrick NAS but in that way you have
a serial consolle too. In t ...
Post Forum: Hardware Modifications   Posted: Sunday, 31 July 2011, 21:10   Subject: Re: 35HD-NAS-E COM-port

felix_max wrote: [
Post Forum: Hardware Modifications   Posted: Sunday, 17 July 2011, 14:01   Subject: Re: 35HD-NAS-E COM-port

Hi, take a look at
This for cables
and
Post Forum: 35HD-DUAL-NAS-E   Posted: Tuesday, 25 January 2011, 05:55   Subject: Raid 1 With Out Of Date Disk And Now GigaNas Wont Start

I have a gigaNAS which suffered a power failure.

whenever I power up the gigaNAS, I have to have a terminal attached to the serial port, otherwise the device doesn't start. (not th ...

if i try to get a report through user's interface, under "disk tools/basic mode/disc details i get this for HDD1:

"HDD 1
smartctl versio ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 26 July 2010, 23:51   Subject: Re: Giganas Only Boots With 1 Drive

Yes. I held the rear button for 10 seconds+ and the settings were reset. made no difference.

Do you know the pinouts for making a cable up? I have an old PC with a real serial port so I ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 26 July 2010, 21:20   Subject: Re: Giganas Only Boots With 1 Drive

Did you try to do a reset with rear push button?

Serial cable is useful to see NAS boot sequence on PC's screen like you're in front of a linux PC booting.
Maybe there's some err ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 26 July 2010, 21:04   Subject: Re: Giganas Only Boots With 1 Drive

I do not have a serial cable.

I have done some more experimenting today.

Using a USB cradle I have checked the health of both drives connected to my windows 7 PC. both sh ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 26 July 2010, 19:46   Subject: Re: Giganas Only Boots With 1 Drive

Anyone of you has a serial cable to try something? You need a 232/TTL 3,3V cable
Post Forum: 35HD-DUAL-NAS-E   Posted: Saturday, 17 July 2010, 14:15   Subject: Alcune Domande - Some Questions

Salve a tutti, sono nuovo del forum ma lo seguo da diverso tempo visto che ho un giganas e volendo seguire gli sviluppi ho letto spesso i vari post.
Ho qualche domanda da portvi per controllare ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Wednesday, 12 May 2010, 14:45   Subject: Re: GUI Problem - Some Parts Are Not Visible

Hello,

I finally managed to restore my NAS firmware. I used the serial console method and loaded the latest version (G5S604110026700).

My problem is however still there. ...
Post Forum:  35HD-DUAL-NAS (IDE&SATA)   Posted: Wednesday, 31 March 2010, 17:50   Subject: Using The Serial Console Port To See If The Hard Drives Are Recognised

I hope this information will be of use to somebody.......

I recently tried to install two Western Digital WD5000AAKB 500 GByte IDE drives to my Dual HDD NAS - IDE version. I tried to fo ...
Post Forum: OpenWRT porting   Posted: Monday, 15 March 2010, 10:44   Subject: Re: OpenWRT For Gemini On SourceForge!

cstamas82 wrote: [
 
 
Page 1 of 9 Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next
All times are UTC + 1 Hour [DST enabled]