Home    Forum    Search    FAQ    Register    Log in
Search found 170 matches
Author Message
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 13 July 2015, 13:03   Subject: Re: [HELP] How To Create OPTWARE Instalation Package

Hi there,

I own two of these boxes but for years I've had problem setting them up and using them properly.

I have them both on RAID with 2x 1TB HDDs. I want to use one of ...
Post Forum: Upgrade problems   Posted: Friday, 03 October 2014, 21:02   Subject: MRT Quad Bricked And Needing Assistance

My MRT QuadBay giga NAS appears to be bricked. not too handy with soldering iron so looking for someone with experience to unbrick it for me.

anyone offering to help? I'll of course pa ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Tuesday, 14 January 2014, 09:47   Subject: Config NAS For XBMC With NFS Network

Hi all,

I have two volumes: ide1 and ide2

I'm trying to configure my NAS with nfs system.

I configure etc/exports file with this:

/mnt/ide ...

Thanks, but too late; I do recall that SMB was active and the system log was written to.
Oddly all was reported 'OK', yet the \public folder could not be opened from remote locations.
< ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Sunday, 05 May 2013, 12:45   Subject: Re: New FIRMWARE And Official Download Site!

well, after two years i'd turned on my old giganas, and searched for an updated firmware: guess all of us accepted by now that this device is dead.
So since embedded systems is dead now too, i ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Wednesday, 11 April 2012, 17:20   Subject: Adding New Hard Drive On Existing NAS

Hi everybody,

Actually, I have installed a single 500 GB Maxtor Hard drive on my two NAS. I ...
Post Forum: 35HD-QUAD-NAS   Posted: Tuesday, 17 January 2012, 14:50   Subject: Hard Drive Questions

Hi everybody,

I have been using the quad nas since 2009 without any problems. Since few days I realized that certain issues started to occur and finally I am almost without data. The NA ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 17 October 2011, 14:07   Subject: Re: HELP: Nas Not Booting

I acquired two new disks, I made a byte to byte copy of the old one which is still "working" so now I have a backup (I hope)

next I tried booting up the nas with only the othe ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Monday, 12 September 2011, 09:50   Subject: Re: HELP: Nas Not Booting

After installing "Ext2 IFS for Windows" I could assign a drive letter but Windows doesn't recognise the file system. So I now also installed "Diskinternals - LinuxReader" and I can ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Saturday, 10 September 2011, 20:38   Subject: Re: HELP: Nas Not Booting

in the meantime I connected a serial adapter and could successfully communicate with the device.

I'll attach two log files:
-one where no hdd was connected
-one where both ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Friday, 04 March 2011, 02:35   Subject: Transfering Data To New Drive

I've gotten hold of a 1Tb drive which is being recognised by my nas
currently all my data is currently stored on a 500Gb drive which is getting rather full.
What i would like to do is tr ...
Post Forum:  35HD-DUAL-NAS (IDE&SATA)   Posted: Thursday, 03 February 2011, 17:57   Subject: RedBoot Kernel Image Format


I got two old 35HD-DUAL-NAS SATA Devices. I like to have OpenWrt on it, I like the console. Okay thats difficult because only Gemini Devices are supported in OpenWrt.
Post Forum: Raidsonic/Stardom SL3620-2S-LB2 NAS   Posted: Saturday, 01 January 2011, 14:24   Subject: Firmware Upgrade - How And Where?

I'll finally got the SL3620-2S-LB2 up and running after it has collected dust for a year now.
For now I run the firmware that came with the box Firmware Version 1.21B , but have had two instanc ...
Post Forum:  35HD-DUAL-NAS (IDE&SATA)   Posted: Sunday, 12 December 2010, 01:13   Subject: Which Port To Forward To Use The NAS To NAS Backup In Different Locations???

I want to use the inbuilt NAS to NAS utility to mirror the data on the two NAS boxes at my home and office. But the utility only allows you to enter the ip address without being able to specify the po ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Tuesday, 09 November 2010, 10:28   Subject: Re: Syabas "Cannot Find Correct Resolution" & Twonky Dont Work With Xbox 360..whats Up??

I installed mediatomb on my 35HD-DUAL-NAS-E and used it with my PS3.
Haven't tested it further (cause the installation is only two days old yet
Post Forum: Raidsonic/Stardom SL3620-2S-LB2 NAS   Posted: Saturday, 16 October 2010, 12:00   Subject: Re: Raidon SL3620 Questions

Thanks for tryingto help me!

But I actualy figured it out myself. It turns out that this apache shit, only were written to the hardrive and not to the firmware as i thought. This weeken ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Saturday, 18 September 2010, 13:30   Subject: GigaNAS Somehow Reset And Now Disks Not Found!


I have a GigaNAS which I've had for a year or two now. I've always had the problem that I need to connect via the comm port to reboot the drive. If I don't then the drive hangs ...
Post Forum: 35HD-QUAD-NAS   Posted: Wednesday, 01 September 2010, 09:06   Subject: Help Adding Disks

I have a Quad NAS configured with RAID 1 with 2 1.5TB disks. I want to add two more disks. The best result for me is to enhance the mirror so I would end up with Mirrored 3TB. However for now I can li ...
Post Forum: 35HD-QUAD-NAS   Posted: Wednesday, 18 August 2010, 14:03   Subject: Introduction And Question

Hi folks-

My name is Tim, I found this forum after purchasing a new 35HD-QUAD NAS. I was very disappointed with the performance over the network and came in search of firmware hoping t ...
Post Forum: 35HD-DUAL-NAS-E   Posted: Tuesday, 27 July 2010, 10:42   Subject: Re: Giganas Only Boots With 1 Drive

Actually it does explain your problem...
When soldering is bad, the unit can't "pull" enough current to run two drives.
Page 1 of 9 Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next
All times are UTC + 1 Hour