Home    Forum    Search    FAQ    Register    Log in


Post new topic  Reply to topic 
Page 3 of 3
Goto page Previous  1, 2, 3
 
New FIRMWARE And Official Download Site!
Author Message
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
i need fresh firmware for my unbricked  35HD-DUAL-NAS-E
now he works under Firmware Version    :G5S604100026702
many function is not works
ntfs don't woking too
 



 
View user's profileSend private message 
Back to topPage bottom
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
i have found a living link to the firmware of our "brick" NAS 35HD-DUAL-NAS-E
This page.
I tested it, it works
 



 
View user's profileSend private message 
Back to topPage bottom
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
well, after two years i'd turned on my old giganas, and searched for an updated firmware: guess all of us accepted by now that this device is dead.
So since embedded systems is dead now too, i downloaded all the stuff from canniballe link and make a mirror of the files in order to preserve them, and who know being handy in the future for someone.

I'd putted in the folder a old firmware which where stored in my NAS which had the ability to spinoff disks.

Not responsible in someway for the firmwares/files or tampered them with anything. Just taked them from the web in order to preserve their existence. Use them at your own risk. My Giganas is running G5S604110026704 which is the one in that link, so i guess in the last few years nothing has changed.

https://cloudpt.pt/link/ef960544-d4...L-NAS-E-GIGANAS
 



 
View user's profileSend private message 
Back to topPage bottom
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
Thank you, thank you, thank you!!!!

I registered for this site specifically to thank any/all who have kept this thread alive and provided a source for the last firmware for this device.

I hadn't had an update for ages, and the one I had was wonky...

New life into my Cavalry Giga-NAS!

 
 



 
View user's profileSend private message 
Back to topPage bottom
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
Hi all guys and users of 35HD-DUal-NAS-E,

For those who wants to have a specific firmwares for the 35HD-DUAL-NAS-E you can find them here.
They are original firmwares from MRT I saved on my backup.
These versions of firmware can be downloaded there:
26300 - 26302 - 26700 - 26702 - 26704.

Enjoy   and have fun..
PAtou
 



 
View user's profileSend private message 
Back to topPage bottom
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
Hello!

And what is the best firmware for Giga nas?

So mine firwmare was an old G5S52256208....can i update to 26704??

Thx.
 



 
View user's profileSend private message 
Back to topPage bottom
Reply with quote Download Post 
Post Re: New FIRMWARE And Official Download Site! 
 
clbrk wrote: [View Post]
Hello!

And what is the best firmware for Giga nas?

So mine firwmare was an old G5S52256208....can i update to 26704??

Thx.


First of all make sure that you have a 35HD-DUAL-NAS-E because updating with a wrong firmware could brick your NAS...
The firmware 26700 should be the best for you until you have need of these improvements made by MRT on firmware 26702 and 26704:
1. Improve support for Safari browser (user name, group)
2. Improve compatibility issue between hardware SL-5121 PHY and DHCP server

In firmware 26700 you can set a sleep time for your hard drives but notice that the first hard drive will be woke up by the system regurlarly because of an Ext3 Partition installed on. If all your drives are formatted in Ext3 then you can forget the sleep function of the NAS.. Formatting in EXT2 works for it.

Before you update make a backup of your data, don't know if you habe a Raid or JBOD system.. In case you have one of these configurations, I don't know how it will work when you update the firmware to 26700.. Should work but don't know the behaviour of the JBOD or Raid system after updating the firmware...
Connect you GIGNAS via LAN directly to your PC sould be the best to avoid transfer errors during firmware update.. Disconnect all your hard drives befor doing a firmware update...

Sent you PM too..

Good luck

Patou  
 



 
View user's profileSend private message 
Back to topPage bottom
Display posts from previous:   
 

Post new topic  Reply to topic  Page 3 of 3
Goto page Previous  1, 2, 3

Users browsing this topic: 0 Registered, 0 Hidden and 0 Guests
Registered Users: None


 
Permissions List
You cannot post new topics
You cannot reply to topics
You cannot edit your posts
You cannot delete your posts
You cannot vote in polls
You cannot attach files
You cannot download files
You can post calendar events